Which answers can you find here
This article is relevant to:
If you have the following interface(s):
- Mapiq Now interface
- Don't know which interface you have? Check out this article.
If you have the following solutions:
- With Controls solution in combination with access to Mapiq Now
- Don't know which solution you have? Check out this article.
Because Mapiq is custom made to fit your situation best, some parts of this page can not be 1 on 1 applicable to situation. Therefore this article gives you basic instructions and generalized information but can differ from the actual situation.
In the tab Here & Now, in the 'available controls' area, you can find all controls which are located around you. This area is based on your location and the nearest controls around you. The controls you can find here are:
- Light controls
- Temperature controls
- Blind controls
Find and open lockers
If the icon lockers is shown in the 'available controls' section of the Here & Now tab, then you're to find and open lockers in the vicinity.
Video: How to find and control lockers
Explanation: How to find and control lockers
If the icon lockers is shown in the 'available controls' section of the Here & Now tab, then you're to find and open lockers in the vicinity. When clicking on the icon:
- You'll get a suggestion of the locker which is nearest (in this case 22 / 22 lockers are available on Den Haag Anticlain)
- You'll see the location of the locker ( the lockers are located on the first floor)
- Open a locker by clicking on the green '+' button
- When opened you'll see a count down of 10 seconds. When the count down is finished, the lock will go open.
- During the day you can open and lock your locker without limitations
- When you're heading home, you can release the locker for one of your other colleagues.